Synergistic enhancement of electrical and ionic conductivity in polyvinyl alcohol/polyvinylpyrrolidone‑copper/lithium titanate oxide electrolyte nanocomposite films for Li-ion battery applications
الكلمات المفتاحية:
Polyvinyl alcohol ; Polyvinylpyrrolidone ; Copper nanoparticles ; Lithium titanate oxide nanoparticles ; Nanocomposite electrolyte ; Energy storageالملخص
Herein, we report the development of polymer nanocomposite electrolyte films tailored for advanced Li-ion battery applications. By incorporating copper/lithium titanate oxide nanoparticles (Cu/Li4Ti5O12 NPs) into a polyvinyl alcohol/polyvinylpyrrolidone (PVA/PVP) blend, we achieved significant enhancements in both ionic and electrical conductivity. The incorporation of Cu boosts the electrical pathways within the polymer matrix, thereby reducing internal resistance and enhancing the overall conductivity. Simultaneously, Li4Ti5O12 acts as an additional source of Li ions, further elevating ionic transport within the electrolyte. Comprehensive analyses via dielectric and impedance spectroscopy confirmed the influence of Cu/Li4Ti5O12 NPs on improving charge storage and transfer capabilities while minimizing electrode polarization across a wide frequency range. These enhancements are attributed to the homogenous distribution of NPs, as validated by scanning electron microscopy (SEM), and the adjusted crystalline characteristics confirmed via X-ray diffraction, leading to increased amorphous regions that support better ion mobility. Fourier-transform infrared spectroscopy (FTIR) also confirms NP-matrix interactions, altering polymer chain dynamics. Besides, thermogravimetric analysis (TGA) indicates increased thermal stability. The results indicate the promising capabilities of these nanocomposite films as efficient solid polymer electrolytes, capable of supporting faster charge-discharge cycles and ensuring enhanced performance and stability in Li-ion batteries.المراجع
[1] W.F. Yong, H. Zhang, Recent advances in polymer blend membranes for gas separation and pervaporation, Prog. Mater. Sci. 116 (2021) 100713.
[2] T. Kietzke, D. Neher, K. Landfester, R. Montenegro, R. Güntner, U. Scherf, Novel approaches to polymer blends based on polymer nanoparticles, Nat. Mater. 2 (6) (2003) 408–412.
[3] E. Fekete, E. Földes, B. Pukánszky, Effect of molecular interactions on the miscibility and structure of polymer blends, Eur. Polym. J. 41
(4) (2005) 727–736. [4] A. Chakraborty, P. Ghalsasi, P. Radha, Insight into Nano-fillers and their reinforcement onto Polylactic acid, J. Inorg. Organomet. Polym. Mater. 33 (5) (2023) 1119–1133.
[5] S.K. Vineeth, P. Sreeram, A. Vlad, R. Joy, P. Raghavan, A. Pullanchiyodan, 7 polymer blend nanocomposite electrolytes for advanced energy storage applications, in: S. Thomas, A.R. Ajitha, M. Jaroszewski (Eds.), Polymer Blend Nanocomposites for Energy Storage Applications, Elsevier, 2023, pp. 203–238.
[6] M. Shahjalal, T. Shams, M.E. Islam, W. Alam, M. Modak, S.B. Hossain, V. Ramadesigan, M.R. Ahmed, H. Ahmed, A. Iqbal, A review of thermal management for Li-ion batteries: prospects, challenges, and issues, J. Energy Storage 39 (2021) 102518.
[7] S. Chavan, B. Venkateswarlu, R. Prabakaran, M. Salman, S.W. Joo, G.S. Choi, S.C. Kim, Thermal runaway and mitigation strategies for electric vehicle lithium ion batteries using battery cooling approach: a review of the current status and challenges, J. Energy Storage 72 (2023) 108569.
[8] P.M. Sundaram, C.B. Soni, S.K. Sungjemmenla, C. Vineeth, V. Kumar Sanjaykumar, Reviving bipolar construction to design and develop high-energy sodium-ion batteries, J. Energy Storage 63 (2023) 107139.
[9] A.M. Abdalla, M.F. Abdullah, M.K. Dawood, B. Wei, Y. Subramanian, A.T. Azad, S. Nourin, S. Afroze, J. Taweekun, A.K. Azad, Innovative lithium-ion battery recycling: sustainable process for recovery of critical materials from lithium-ion batteries, J. Energy Storage 67 (2023) 107551.
[10] Y. An, X. Han, Y. Liu, A. Azhar, J. Na, A.K. Nanjundan, S. Wang, J. Yu, Y. Yamauchi, Progress in solid polymer electrolytes for lithium-ion batteries and beyond, Small 18 (3) (2022) 2103617.
[11] J. Mindemark, M.J. Lacey, T. Bowden, D. Brandell, Beyond PEO—alternative host materials for Li+-conducting solid polymer electrolytes, Prog. Polym. Sci. 81 (2018) 114–143.
[12] F. Yuan, H.-Z. Chen, H.-Y. Yang, H.-Y. Li, M. Wang, PAN–PEO solid polymer electrolytes with high ionic conductivity, Mater. Chem. Phys. 89 (2) (2005) 390–394.
[13] L. Tang, B. Chen, Z. Zhang, C. Ma, J. Chen, Y. Huang, F. Zhang, Q. Dong, G. Xue, D. Chen, C. Hu, S. Li, Z. Liu, Y. Shen, Q. Chen, L. Chen, Polyfluorinated crosslinker-based solid polymer electrolytes for long-cycling 4.5 V lithium metal batteries, Nat. Commun. 14 (1) (2023) 2301.
[14] V.M. Macedo, J.C. Barbosa, H. Salazar, A. Fidalgo-Marijuan, R.K.R. Gajjala, L. Almásy, B.F. Gonçalves, V.I. Petrenko, M.M. Silva, R. Gonçalves, C.M. Costa, S. Lanceros-Mendez, Enhanced performance of solid polymer electrolytes combining poly(vinylidene fluoride-co-hexafluoropropylene), metal-organic framework and ionic liquid for advanced solid state lithium-ion batteries, J. Energy Storage 90 (2024) 111919.
[15] Y.-D. Kim, Y.-K. Jo, N.-J. Jo, Electrochemical performance of poly(vinyl alcohol)-based solid polymer electrolyte for lithium polymer batteries, J. Nanosci. Nanotechnol. 12 (4) (2012) 3529–3533.
[16] N. Farah, H.M. Ng, A. Numan, C.-W. Liew, N.A.A. Latip, K. Ramesh, S. Ramesh, Solid polymer electrolytes based on poly(vinyl alcohol) incorporated with sodium salt and ionic liquid for electrical double layer capacitor, Mater. Sci. Eng. B 251 (2019) 114468.
[17] R. Mangalam, M. Thamilselvan, S. Selvasekarapandian, S. Jayakumar, R. Manjuladevi, Polyvinyl pyrrolidone/Mg(ClO4)2 solid polymer electrolyte: structural and electrical studies, Ionics 23 (10) (2017) 2837–2843.
[18] T. Regu, C. Ambika, K. Karuppasamy, H. Rajan, D. Vikraman, J.-H. Jeon, H.-S. Kim, T. Ajith Bosco Raj, Proton transport and dielectric properties of high molecular weight polyvinylpyrrolidone (PVPK90) based solid polymer electrolytes for portable electrochemical devices, J. Mater. Sci.-Mater. Electron. 30 (12) (2019) 11735–11747.
[19] J.-E. Lee, M.-C. Kim, S.-H. Moon, E.-S. Kim, Y.-K. Shin, S. Choi, S.-H. Kwon, S.-J. Kim, H.-J. Kwon, K.-W. Park, Role of polyvinylpyrrolidone in the electrochemical 8 CORRECTED PROOF A. Saeed et al. Journal of Energy Storage xxx (xxxx) 114534 performance of Li2MnO3 cathode for lithium-ion batteries, RSC Adv. 9 (18) (2019) 10297–10304.
[20] J. Wei, D. Liang, Y. Ji, B. Chen, C. Jiang, X. Li, Enhanced electrochemical performance of cobalt oxide layers coated LiNi0.8Co0.1Mn0.1O2 by polyvinylpyrrolidone-assisted method cathode for Li-ion batteries, J. Colloid Interface Sci. 616 (2022) 520–531.
[21] Y.S. Zhu, X.J. Wang, Y.Y. Hou, X.W. Gao, L.L. Liu, Y.P. Wu, M. Shimizu, A new single-ion polymer electrolyte based on polyvinyl alcohol for lithium ion batteries, Electrochim. Acta 87 (2013) 113–118.
[22] G. Ek, F. Jeschull, T. Bowden, D. Brandell, Li-ion batteries using electrolytes based on mixtures of poly(vinyl alcohol) and lithium bis(triflouromethane) sulfonamide salt, Electrochim. Acta 246 (2017) 208–212.
[23] W. Miao, J. Wang, G. Li, S. Liu, X. Luo, Superior thermal stability of PVA/ cellulose composite membranes for lithium-ion battery separators prepared by impregnation method with noncovalent cross-linking of intermolecular multiple hydrogen-bonds, J. Energy Storage 66 (2023) 107353.
[24] Z. Li, P. Liu, X. Li, S. Guan, S. Chen, S. Liu, E. Cui, Y. Yu, W. Pan, N. Tang, Y. Gu, L. Wang, Y. Liu, Design strategies for environmentally friendly polyvinyl alcohol hydrogel sensors: research progress and perspectives, Mater. Today Commun. 39 (2024) 109401.
[25] P.L. Reddy, K. Deshmukh, K. Chidambaram, M.M.N. Ali, K.K. Sadasivuni, Y.R. Kumar, R. Lakshmipathy, S.K.K. Pasha, Dielectric properties of polyvinyl alcohol (PVA) nanocomposites filled with green synthesized zinc sulphide (ZnS) nanoparticles, J. Mater. Sci.-Mater. Electron. 30 (5) (2019) 4676–4687.
[26] K. Rajesh, V. Crasta, N.B. Rithin Kumar, G. Shetty, P.D. Rekha, Structural, optical, mechanical and dielectric properties of titanium dioxide doped PVA/PVP nanocomposite, J. Polym. Res. 26 (4) (2019) 99.
[27] T. Liu, C. Jiao, X. Peng, Y.-N. Chen, Y. Chen, C. He, R. Liu, H. Wang, Super strong and tough poly(vinyl alcohol)/poly(acrylic acid) hydrogels reinforced by hydrogen bonding, J. Mater. Chem. B 6 (48) (2018) 8105–8114.
[28] M.S.B. Husain, A. Gupta, B.Y. Alashwal, S. Sharma, Synthesis of PVA/PVP based hydrogel for biomedical applications: a review, Energy Sour. Part A 40 (20) (2018) 2388–2393.
[29] M. Teodorescu, M. Bercea, S. Morariu, Biomaterials of PVA and PVP in medical and pharmaceutical applications: perspectives and challenges, Biotechnol. Adv. 37 (1) (2019) 109–131.
[30] H.L. Abd El-Mohdy, S. Ghanem, Biodegradability, antimicrobial activity and properties of PVA/PVP hydrogels prepared by γ-irradiation, J. Polym. Res. 16 (1) (2009) 1–10.
[31] P. Sudheesh, K.N. Sharafudeen, S. Vijayakumar, K. Chandrasekharan, Preparation and study of nonlinear optical response of ag and au nano particles doped PVA/PVP thin films, J. Opt. 40 (4) (2011) 193–197.
[32] Z.K. Heiba, A.M. El-naggar, M.B. Mohamed, Y. Altowairqi, A.M. Kamal, Noval properties of PVA/PVP polymer blend doped by nano-ZnO/M (M = Co, Cu, Mn, V), Appl. Phys. A Mater. Sci. Process. 127 (12) (2021) 976.
[33] Z.K. Heiba, A.M. El-naggar, M.B. Mohamed, A.M. Kamal, M.M. Osman, A.A. Albassam, G. Lakshminarayana, Modifications of the structural and optical properties of PVA/PVP loaded with Zn0.75-xCd0.25VxS nano powders, Opt. Quant. Electron. 54 (7) (2022) 452. [34] A. Al-Muntaser, H.M. Abo-Dief, A.E. Tarabiah, E. Alzahrani, H.A. Alsalmah, Z.M. Alharbi, R.A. Pashameah, A. Saeed, Incorporated TiO2 nanoparticles into PVC/PMMA polymer blend for enhancing the optical and electrical/dielectric properties: hybrid nanocomposite films for flexible optoelectronic devices, Polym. Eng. Sci. 63 (11) (2023) 3684–3697.
[35] A.A. Al-Muntaser, E. Alzahrani, H.M. Abo-Dief, A. Saeed, F.A. Al-Marhaby, A.M. Al-Harthi, A.E. Tarabiah, Enhancement of the structural, optical, and dispersion performance of polyvinyl alcohol via coronene additive for optoelectronic applications, Phys. Scr. 98 (11) (2023) 115964.
[36] A.A. Al-Muntaser, E. Alzahrani, H.M. Abo-Dief, A. Saeed, E.M. Alshammari, A.M. Al-Harthi, A.E. Tarabiah, Tuning the structural, optical, electrical, and dielectric properties of PVA/PVP/CMC ternary polymer blend using ZnO nanoparticles for nanodielectric and optoelectronic devices, Opt. Mater. 140 (2023) 113901.
[37] M.A. Morsi, G.M. Asnag, A.S. Assran, R. Alwafi, A.E. Tarabiah, N.A. Alshehri, A.N. Al-Hakimi, A. Saeed, Reinforced PEO/Cs polymers blend with Al2O3/TiO2 hybrid nanofillers: nanocomposites for optoelectronics and energy storage, J. Energy Storage 88 (2024) 111554.
[38] A. Saeed, J.A.M. Abdulwahed, Development and characterization of PVA-based nanocomposites with graphene and natural quartz nanoparticles for energy storage applications, J. Energy Storage 98 (2024) 113138.
[39] A. Saeed, G.M. Asnag, A.M. Alghamdi, S.A. Alghamdi, R. Alwafi, F.K. Alanazi, A.M. Alosaimi, S.A. Aladeemy, Z.M. Alaizeri, Structural, optical, and electrical characteristics of HPMC/PVA-I2O5 composites: fabrication and performance analysis for energy storage applications, J. Energy Storage 96 (2024) 112765.
[40] A. Saeed, E. Banoqitah, J.A.M. Abdulwahed, F. Alajmi, A.Y. Madkhli, F.A. Al Marhaby, K. Albaidani, M. Algethami, A.S. Assran, R. Alwafi, G.M. Asnag, A comprehensive study on structural, optical, electrical, and dielectric properties of PVA-PVP/Ag-TiO2 nanocomposites for dielectric capacitor applications, J. Alloys Compd. 977 (2024) 173412. [41] A. Saeed, I. Guizani, F.E. Hanash, G.M. Asnag, A.M. Al-Harthi, R. Alwafi, T.F. Qahtan, M.A. Morsi, A.S. Assran, Enhancing optical, structural, thermal, electrical properties, and antibacterial activity in chitosan/polyvinyl alcohol blend with ZnO nanorods: polymer nanocomposites for optoelectronics and food/medical packaging applications, Polym. Bull. 81 (13) (2024) 11645–11670.
[42] J. Yue, F.M. Badaczewski, P. Voepel, T. Leichtweiß, D. Mollenhauer, W.G. Zeier, B.M. Smarsly, Critical role of the crystallite size in nanostructured Li4Ti5O12 anodes for lithium-ion batteries, ACS Appl. Mater. Interfaces 10 (26) (2018) 22580–22590.
[43] A.A. Menazea, A.M. Ismail, I.S. Elashmawi, The role of Li4Ti5O12 nanoparticles on enhancement the performance of PVDF/PVK blend for lithium-ion batteries, J. Mater. Res. Technol. 9 (3) (2020) 5689–5698.
[44] Q. Cui, Y. Zhong, L. Pan, H. Zhang, Y. Yang, D. Liu, F. Teng, Y. Bando, J. Yao, X. Wang, Recent advances in designing high-capacity anode nanomaterials for Li-ion batteries and their atomic-scale storage mechanism studies, Adv. Sci. 5 (7) (2018) 1700902.
[45] H.S. Bhatti, D.H. Anjum, S. Ullah, B. Ahmed, A. Habib, A. Karim, S.K. Hasanain, Electrochemical characteristics and Li+ ion intercalation kinetics of dual-phase Li4Ti5O12/Li2TiO3 composite in the voltage range 0–3 V, J. Phys. Chem. C 120 (18) (2016) 9553–9561.
[46] H. Yan, D. Zhang, X. Qilu, X. Sheng Duo, A review of spinel lithium titanate (Li4Ti5O12) as electrode material for advanced energy storage devices, Ceram. Int. 47 (5) (2021) 5870–5895.
[47] C. Muhammed Ajmal, A.P. Benny, W. Jeon, S. Kim, S.W. Kim, S. Baik, In-situ reduced non-oxidized copper nanoparticles in nanocomposites with extraordinary high electrical and thermal conductivity, Mater. Today 48 (2021) 59–71.
[48] M. Li, A. Borsay, M. Dakhchoune, K. Zhao, W. Luo, A. Züttel, Thermal stability of size-selected copper nanoparticles: effect of size, support and CO2 hydrogenation atmosphere, Appl. Surf. Sci. 510 (2020) 145439.
[49] F. Alonso, Y. Moglie, G. Radivoy, Copper nanoparticles in click chemistry, Acc. Chem. Res. 48 (9) (2015) 2516–2528.
[50] L. Lin, Y. Ma, Q. Xie, L. Wang, Q. Zhang, D.-L. Peng, Copper-nanoparticle induced porous Si/cu composite films as an anode for lithium ion batteries, ACS Nano 11 (7) (2017) 6893–6903.
[51] P. Han, T. Yuan, L. Yao, Z. Han, J. Yang, S. Zheng, Copper nanoparticle incorporated carbon fibers as free-standing anodes for lithium-ion batteries, Nanoscale Res. Lett. 11 (1) (2016) 172.
[52] M. Marinaro, F. Nobili, R. Tossici, R. Marassi, Microwave-assisted synthesis of carbon (Super-P) supported copper nanoparticles as conductive agent for Li4Ti5O12 anodes for Lithium-ion batteries, Electrochim. Acta 89 (2013) 555–560.
[53] F.F. Hatta, M.Z.A. Yahya, A.M.M. Ali, R.H.Y. Subban, M.K. Harun, A.A. Mohamad, Electrical conductivity studies on PVA/PVP-KOH alkaline solid polymer blend electrolyte, Ionics 11 (5) (2005) 418–422.
[54] M.I. Mohammed, Controlling the optical properties and analyzing mechanical, dielectric characteristics of MgO doped (PVA–PVP) blend by altering the doping content for multifunctional microelectronic devices, Opt. Mater. 133 (2022) 112916.
[55] S.B. Aziz, M.A. Rasheed, A.M. Hussein, H.M. Ahmed, Fabrication of polymer blend composites based on [PVA-PVP](1−x):(Ag2S)x (0.01 ≤ x ≤ 0.03) with small optical band gaps: structural and optical properties, Mater. Sci. Semicond. Process. 71 (2017) 197–203. [56] S. Qing-feng, W. Xian-ming, W. Xian-wen, W. Zhi-ru, L. Jing-li, High performance of β-cyclodextrin-derived Li4Ti5O12/C anode composites for lithium ion battery, Ionics 26 (5) (2020) 2217–2223.
[57] Z. Wang, G. Xie, L. Gao, Electrochemical characterization of Li4Ti5O12/C anode material prepared by starch-sol-assisted rheological phase method for Li-ion battery, J. Nanomater. 2012 (1) (2012) 876197.
[58] D. Deng, Y. Cheng, Y. Jin, T. Qi, F. Xiao, Antioxidative effect of lactic acid stabilized copper nanoparticles prepared in aqueous solution, J. Mater. Chem. 22 (45) (2012) 23989–23995.
[59] M. Biçer, İ. Şişman, Controlled synthesis of copper nano/microstructures using ascorbic acid in aqueous CTAB solution, Powder Technol. 198 (2) (2010) 279–284.
[60] S. Gupta, A.K. Pramanik, A. Kailath, T. Mishra, A. Guha, S. Nayar, A. Sinha, Composition dependent structural modulations in transparent poly(vinyl alcohol) hydrogels, Colloids Surf. B: Biointerfaces 74 (1) (2009) 186–190.
[61] R. Kandulna, R.B. Choudhary, Concentration-dependent behaviors of ZnO reinforced PVA–ZnO nanocomposites as electron transport materials for OLED application, Polym. Bull. 75 (7) (2018) 3089–3107.
[62] J.P. Jose, V. Mhetar, S. Culligan, S. Thomas, Cross linked polyethylene/TiO2 nanocomposites: morphology, polymer/filler interaction, mechanics and thermal properties, Sci. Adv. Mater. 5 (4) (2013) 385–397.
[63] P.H. Hermans, A. Weidinger, X-ray studies on the crystallinity of cellulose, J. Polym. Sci. 4 (2) (1949) 135–144.
[64] V. Abhilash, N. Rajender, K. Suresh, Chapter 14- X-ray diffraction spectroscopy of polymer nanocomposites, in: S. Thomas, D. Rouxel, D. Ponnamma (Eds.), Spectroscopy of Polymer Nanocomposites, William Andrew Publishing, 2016, pp. 410–451.
[65] M.A. El-Morsy, N.S. Awwad, H.A. Ibrahium, M.O. Farea, Optical, and electrical conductivity properties of ZnO and TiO2 nanoparticles scattered in PEO-PVA for electrical devices, Results Phys. 50 (2023) 106592.
[66] F. Croce, G.B. Appetecchi, L. Persi, B. Scrosati, Nanocomposite polymer electrolytes for lithium batteries, Nature 394 (6692) (1998) 456–458.
[67] Y. Zhao, L. Wang, Y. Zhou, Z. Liang, N. Tavajohi, B. Li, T. Li, Solid polymer electrolytes with high conductivity and transference number of Li ions for Li based rechargeable batteries, Adv. Sci. 8 (7) (2021) 2003675.
[68] S. Luo, X. Qiao, Q. Wang, Y. Zhang, P. Fu, Z. Lin, F. Du, C. Cheng, Excellent self healing and antifogging coatings based on polyvinyl alcohol/hydrolyzed poly (styrene-co-maleic anhydride), J. Mater. Sci. 54 (7) (2019) 5961–5970.
[69] A.M. El Sayed, Boosting the optical and electrical properties of PVA/Na-CMC blend by Cr2O3 nanoparticles for photonic and energy storage applications, J. Energy Storage 82 (2024) 110609.
[70] A. Badawi, Enhancement of the optical properties of PVP using Zn1-xSnxS for 9 CORRECTED PROOF A. Saeed et al. Journal of Energy Storage xxx (xxxx) 114534 UV-region optical applications, Appl. Phys. A Mater. Sci. Process. 127 (1) (2021) 51.
[71] G.M. Kim, A.S. Asran, G.H. Michler, P. Simon, J.S. Kim, Electrospun PVA/HAp nanocomposite nanofibers: biomimetics of mineralized hard tissues at a lower level of complexity, Bioinspir. Biomim. 3 (4) (2008) 046003.
[72] D. Ciprari, K. Jacob, R. Tannenbaum, Characterization of polymer nanocomposite interphase and its impact on mechanical properties, Macromolecules 39 (19) (2006) 6565–6573.
[73] Z. Chen, J.N. Hay, M.J. Jenkins, FTIR spectroscopic analysis of poly(ethylene terephthalate) on crystallization, Eur. Polym. J. 48 (9) (2012) 1586–1610.
[74] J.O. Dennis, A.A. Adam, M.K.M. Ali, H. Soleimani, M.F.B.A. Shukur, K.H. Ibnaouf, O. Aldaghri, M.H. Eisa, M.A. Ibrahem, A. Bashir Abdulkadir, V. Cyriac, Substantial Proton Ion Conduction in Methylcellulose/Pectin/Ammonium Chloride Based Solid Nanocomposite Polymer Electrolytes: Effect of ZnO Nanofiller, Membranes, 2022, p. 706.
[75] Q. Lin, D. Kundu, M. Skyllas-Kazacos, J. Lu, D. Zhao, K. Amine, L. Dai, D.-W. Wang, Perspective on Lewis acid-base interactions in emerging batteries, Adv. Mater. n/a(n/a) (2024) 2406151.
[76] G. Liu, W. Weng, Z. Zhang, L. Wu, J. Yang, X. Yao, Densified Li6PS5Cl nanorods with high ionic conductivity and improved critical current density for all-solid state lithium batteries, Nano Lett. 20 (9) (2020) 6660–6665.
[77] L.-Y. Chen, J.-Y. Peng, J.-Q. Xu, H. Choi, X.-C. Li, Achieving uniform distribution and dispersion of a high percentage of nanoparticles in metal matrix nanocomposites by solidification processing, Scr. Mater. 69 (8) (2013) 634–637.
[78] K.J. Brobbey, J. Haapanen, J.M. Mäkelä, M. Gunell, E. Eerola, E. Rosqvist, J. Peltonen, J.J. Saarinen, M. Toivakka, Characterization of flame coated nanoparticle surfaces with antibacterial properties and the heat-induced embedding in thermoplastic-coated paper, SN Appl. Sci. 1 (1) (2019) 65.
[79] Q. Zhang, K. Liu, F. Ding, X. Liu, Recent advances in solid polymer electrolytes for lithium batteries, Nano Res. 10 (12) (2017) 4139–4174.
[80] A. del Bosque, B.K. Muñoz, M. Sánchez, A. Ureña, Thermomechanically robust ceramic/polymer nanocomposites modified with ionic liquid for hybrid polymer electrolyte applications, ACS Appl. Energy Mater. 5 (4) (2022) 4247–4258.
[81] Z. Wang, W. Zheng, W. Sun, L. Zhao, W. Yuan, Covalent organic frameworks enhanced ionic conductivity of polymeric ionic liquid-based ionic gel electrolyte for lithium metal battery, ACS Appl. Energy Mater. 4 (3) (2021) 2808–2819.
[82] M.T. Ramesan, M. Varghese, J. P, P. Periyat, Silver-doped zinc oxide as a nanofiller for development of poly(vinyl alcohol)/poly(vinyl pyrrolidone) blend nanocomposites, Adv. Polym. Technol. 37 (1) (2018) 137–143.
[83] M.T. Ramesan, P. Jayakrishnan, T. Anilkumar, G. Mathew, Influence of copper sulphide nanoparticles on the structural, mechanical and dielectric properties of poly(vinyl alcohol)/poly(vinyl pyrrolidone) blend nanocomposites, J. Mater. Sci. Mater. Electron. 29 (3) (2018) 1992–2000.
[84] K. Król-Morkisz, K. Pielichowska, 13- thermal decomposition of polymer nanocomposites with functionalized nanoparticles, in: K. Pielichowski, T.M. Majka (Eds.), Polymer Composites with Functionalized Nanoparticles, Elsevier, 2019, pp. 405–435.
[85] T.M. Majka, A. Leszczyńska, K. Pielichowski, Thermal stability and degradation of polymer nanocomposites, in: X. Huang, C. Zhi (Eds.), Polymer Nanocomposites: Electrical and Thermal Properties, Springer International Publishing, Cham, 2016, pp. 167–190.
[86] T. Saha, A.K. Bhowmick, T. Oda, T. Miyauchi, N. Fujii, Influence of layered nanofillers on the mechanical properties and thermal degradation of polyacrylicester polymer: theoretical and experimental investigations, Compos. Part B Eng. 169 (2019) 65–78.
[87] P. Raut, S. Li, Y.-M. Chen, Y. Zhu, S.C. Jana, Strong and flexible composite solid polymer electrolyte membranes for Li-ion batteries, ACS Omega 4 (19) (2019) 18203–18209.
[88] X. Zhang, B.-W. Li, L. Dong, H. Liu, W. Chen, Y. Shen, C.-W. Nan, Superior energy storage performances of polymer nanocomposites via modification of filler/polymer interfaces, Adv. Mater. Interfaces 5 (11) (2018) 1800096.
[89] H. Liu, J. Gao, W. Huang, K. Dai, G. Zheng, C. Liu, C. Shen, X. Yan, J. Guo, Z. Guo, Electrically conductive strain sensing polyurethane nanocomposites with synergistic carbon nanotubes and graphene bifillers, Nanoscale 8 (26) (2016) 12977–12989.
[90] O. Jalled, Z. Alharbi, S.R. Alharbi, A. Saeed, M. Alhassan, S. Al-Heniti, H.Y. Mohammed, Y. Al-Hadeethi, F. Al-Marzouki, A. Al-Mujtaba, Synthesis and dielectric properties of nanocrystalline strontium bismuth niobate, J. Nanosci. Nanotechnol. 17 (1) (2017) 594–600.
[91] K.K. K, R. M, P. Y, B. S, S. A.K, N.R. V.V.R, Electrical conduction mechanism in NaCl complexed PEO/PVP polymer blend electrolytes, J. Non-Cryst. Solids 358 (23) (2012) 3205–3211.
[92] A.M.M. Farea, S. Kumar, K. Mujasam Batoo, A. Yousef, Alimuddin, Influence of frequency, temperature and composition on electrical properties of polycrystalline Co0.5CdxFe2.5−xO4 ferrites, Physica B 403 (4) (2008) 684–701.
[93] Y. Liu, Y. Yang, Recent progress of TiO2-based anodes for Li ion batteries, J. Nanomater. 2016 (1) (2016) 8123652.
[94] R. Zhao, S. Zhang, J. Liu, J. Gu, A review of thermal performance improving methods of lithium ion battery: electrode modification and thermal management system, J. Power Sources 299 (2015) 557–577.
[95] R. Alwafi, A. Saeed, Single-walled carbon nanotubes in nanosized basalts as nanocomposites: the electrical/dielectric properties and electromagnetic interference shielding performance, J. Inorg. Organomet. Polym. Mater. 32 (11) (2022) 4340–4358.
[96] Y. Ohki, Broadband complex permittivity and electric modulus spectra for dielectric materials research, IEEJ Trans. Electr. Electron. Eng. 17 (7) (2022) 958–972.
[97] A. Al Ojeery, M.O. Farea, Optimizing and boosting the physicochemical properties of some polymer nanocomposites for high-performance and flexible energy storage systems, J. Energy Storage 80 (2024) 110309.
[98] M.A. Morsi, E.M. Abdelrazek, A.E. Tarabiah, E. Salim, Preparation and tuning the optical and electrical properties of polyethylene oxide/polyvinyl alcohol/poly (3,4-thylenedioxythiophene): polystyrene sulfonate/CuO-based quaternary nanocomposites for futuristic energy storage devices, J. Energy Storage 80 (2024) 110239.
[99] A. Saeed, A.Y. Madkhli, M. Al-Dossari, F. Abolaban, Electrical and dielectric properties of composites composed of natural quartz with aluminum, Silicon 14 (15) (2022) 9517–9531.
[100] G. Zhang, D. Brannum, D. Dong, L. Tang, E. Allahyarov, S. Tang, K. Kodweis, J. K. Lee, L. Zhu, Interfacial polarization-induced loss mechanisms in polypropylene/BaTiO3 nanocomposite dielectrics, Chem. Mater. 28 (13) (2016) 4646–4660.
[101] H. Cheng, D. Li, B. Xu, Y. Wei, H. Wang, B. Jiang, X. Liu, H. Xu, Y. Huang, Amorphous silicon nitride induced high dielectric constant toward long-life solid lithium metal battery, Energy Storage Mater. 53 (2022) 305–314.
[102] W. Xia, Q. Zhang, X. Wang, Z. Zhang, Electrical energy discharging performance of poly(vinylidene fluoride-co-trifluoroethylene) by tuning its ferroelectric relaxation with polymethyl methacrylate, J. Appl. Polym. Sci. 131 (7) (2014).
[103] V.R. Sunitha, S. Radhakrishnan, Impedance and dielectric studies of nanocomposite polymer electrolyte systems using MMT and ferroelectric fillers, Ionics 22 (12) (2016) 2437–2446.
[104] V. Prabu A, V. G V, B.A. M, R. Jan, S. Parveen J, P. K, Collegial effects of CeO2/ SiC nano-fillers on dielectric, thermal, impedance and conductivity behavior of PVDF-HFP matrix for flexible energy storage applications, Polym.-Plast. Technol. Mater. 63 (7) (2024) 830–843.
[105] D. Li, D. Qin, F. Nie, L. Wen, L. Xue, Enhancement of electrochemical performance of lithium-ion battery by single-ion conducting polymer addition in ceramic-coated separator, J. Mater. Sci. 53 (15) (2018) 11038–11049.
[106] R. Kumar, S.A. Suthanthiraraj, Segmental mobility and relaxation processes of Fe2O3 nanoparticle-loaded fast ionic transport nanocomposite gel polymer electrolyte, J. Solid State Electrochem. 18 (6) (2014) 1647–1656.
[107] M.C. Dimri, D. Kumar, S.B. Aziz, K. Mishra, ZnFe2O4 nanoparticles assisted ion transport behavior in a sodium ion conducting polymer electrolyte, Ionics 27 (3) (2021) 1143–1157.
[108] S. Yu, P. Hing, X. Hu, Dielectric properties of polystyrene–aluminum-nitride composites, J. Appl. Phys. 88 (1) (2000) 398–404.
[109] Z. Wang, W. Zhou, L. Dong, X. Sui, H. Cai, J. Zuo, Q. Chen, Dielectric spectroscopy characterization of relaxation process in Ni/epoxy composites, J. Alloys Compd. 682 (2016) 738–745.
[110] B. Gowtham, V. Balasubramani, S. Ramanathan, M. Ubaidullah, S.F. Shaikh, G. Sreedevi, Dielectric relaxation, electrical conductivity measurements, electric modulus and impedance analysis of WO3 nanostructures, J. Alloys Compd. 888 (2021) 161490.
[111] D.K. Pradhan, R.N.P. Choudhary, B.K. Samantaray, Studies of dielectric and electrical properties of plasticized polymer nanocomposite electrolytes, Mater. Chem. Phys. 115 (2) (2009) 557–561.
منشور
إصدار
القسم
الرخصة
الحقوق الفكرية (c) 2026 "This Open Access article is distributed under the Creative Commons Attribution 4.0 International License (CC BY 4.0), permitting unrestricted use, distribution, and adaptation provided the original author and source are properly credited."

هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.