Hybrid Co3O4/Al2O3 nanofiller reinforced PEO/HPMC nanocomposite electrolytes for high-performance microcapacitors and optoelectronic devices
DOI:
https://doi.org/10.1080/16583655.2025.2554418Keywords:
optoelectronics applications, energy storage, dielectric properties, PEO/HPMC blend, Co3O4/Al2O3 nanofillerAbstract
In this study, we present a novel dual-filler polymer-based solid electrolyte by incorporating cobalt oxide/aluminium oxide (Co3O4/Al2O3) nanoparticles into a blend of polyethylene oxide (PEO) and hydroxypropyl methylcellulose (HPMC). The electrolytes were synthesized via solution casting. XRD confirmed the reduction in crystallinity upon nanofiller addition, enhancing ionic mobility. UV-Vis analysis revealed a marked decrease in both direct and indirect optical band gaps indicating improved charge carrier transport. Dielectric studies further demonstrated enhanced permittivity and polarization effects, while AC conductivity exhibited strong frequency-dependent enhancement. The novelty of this work lies in the synergistic use of Co3O4 and Al2O3 within a blend matrix, leading to simultaneous improvements in ionic mobility, optical tunability, and dielectric response. These advancements make the material a promising candidate for next-generation energy storage systems and optoelectronic devices, contributing to the development of sustainable and efficient technologies for society.
References
Abdelrazek, E. M., Abdelghany, A. M., Alshehari, A. M., & et al. (2020). Structural, optical, thermal, morphological and electrical studies of PEMA/PMMA blend filled with CoCl2 and LiBr as mixed filler. Journal of Electronic Materials, 49(10), 6107–6122. https://doi.org/10.1007/s11664-020-08342-0
Abou El-Reash, Y. G., Abdelghany, A. M., & Elrazak, A. A. (2016). Removal and separation of Cu(II) from aqueous solutions using nano-silver chitosan/polyacrylamide membranes. International Journal of Biological Macromolecules, 86, 789–798. https://doi.org/10.1016/j.ijbiomac.2016.01.101
Ahmed, H. T., & Abdullah, O. G. (2020). Structural and ionic conductivity characterization of PEO:MC-NH4I proton-conducting polymer blend electrolytes based films. Results in Physics, 16, Article 102861. https://doi.org/10.1016/j.rinp.2019.102861
Alenizi, M. A., Al-Ghamdi, S. A., Saeed, A., & et al. (2024). Structural, optical, electrical, and dielectric properties of HPMC/PVP blend reinforced with I2O5 for optoelectronics and energy storage applications. Journal of Polymer Research, 31(11), Article 4181. https://doi.org/10.1007/s10965-024-04181-3
Alghamdi, H. M., & Rajeh, A. (2025). Integrating the structural, optical, magnetic, electrical, and dielectric properties of PAM/PEO/NiCo2O4 nanocomposites for opto-magnetic and energy storage applications. Ceramics International, 51(12), 18045–18055. https://doi.org/10.1016/j.ceramint.2025.01.581
Al-Gharram, M., & Alzoubi, T. (2024). Electrochemical synthesis of a novel hybrid nanocomposite based on Co3O4 nanoparticles embedded in PANI-camphor sulfonic acid matrix for optoelectronic applications. Ceramics International, 50(4), 5473–5482. https://doi.org/10.1016/j.ceramint.2023.11.300
Al-Harbi, L. M., Alsulami, QA., Farea, M. O., & et al. (2023). Tuning optical, dielectric, and electrical properties of polyethylene oxide/carboxymethyl cellulose doped with mixed metal oxide nanoparticles for flexible electronic devices. Journal of Molecular Structure, 1272, Article 134244. https://doi.org/10.1016/j.molstruc.2022.134244
Alharbi, E. M., & Rajeh, A. (2022). Tailoring the structural, optical, dielectric, and electrical properties of PEO/PVA blend using graphene nanoplates for energy storage devices. Journal of Materials Science: Materials in Electronics, 33(27), 22196–22207. https://doi.org/10.1007/s10854-022-08999-9
Alhussain, H., Alghamdi, A. M., Rajeh, A., & et al. (2024). Recent progress in enhanced optical, mechanical, thermal properties, and antibacterial activity of the chitosan/polyvinylalcohol/Co3O4 nanocomposites for optoelectronics and biological applications. Journal of Polymers and the Environment, 32(10), 3735–3748. https://doi.org/10.1007/s10924-024-03191-y
Ali, F. M., Kershi, R. M., Sayed, M. A., & et al. (2018). Evaluation of structural and optical properties of Ce3+ ions doped (PVA/PVP) composite films for new organic semiconductors. Physica B: Condensed Matter, 538, 160–166. https://doi.org/10.1016/j.physb.2018.03.031
Al-Mhyawi, S. R., Al-Sulami, A. I., AlSulami, F. M. H., & et al. (2025a). Preparation and modulating of the thermal, optical, dielectric, and electrical properties of PCL/PMMA-NiO/SnO2 nanocomposites for energy storage devices. Ceramics International, 51(20), 32623–32636. https://doi.org/10.1016/j.ceramint.2025.04.440
Al-Mhyawi, S. R., Al-Sulami, A. I., AlSulami, F. M. H., & et al. (2025b). Synthesis, characterization, and multifunctional properties of polyvinylpyrrolidone/chitosan/iron molybdate nanocomposites for electrochemical devices. Journal of Science: Advanced Materials and Devices, 10(1), Article 100920. https://doi.org/10.1016/j.jsamd.2025.100920
Al-Muntaser, A. A., Alzahrani, E., Abo-Dief, H. M., & et al. (2023). Tuning the structural, optical, electrical, and dielectric properties of PVA/PVP/CMC ternary polymer blend using ZnO nanoparticles for nandielectric and optoelectronic devices. Optical Materials, 140, Article 113901. https://doi.org/10.1016/j.optmat.2023.113901
Al-Ojeery, A., & Farea, M. O. (2023). Optical and dielectric properties of polymer nanocomposite based on PEG/NaAlg blend and Ag/Au nanoparticles prepared by green synthesis method for energy storage applications. Optical and Quantum Electronics, 55(11), Article 988. https://doi.org/10.1007/s11082-023-05243-4
Alsulami, Q. A., & Rajeh, A. (2023). Modification and development in the microstructure of PVA/CMC-GO/Fe3O4 nanocomposites films as an application in energy storage devices and magnetic electronics industry. Ceramics Internationalヌ, 49(9), 14399–14407. https://doi.org/10.1016/j.ceramint.2023.01.029
Alwafi, R., & Saeed, A. (2022). Single-Walled carbon nanotubes in nanosized basalts as nanocomposites: The electrical/dielectric properties and electromagnetic interference shielding performance. Journal of Inorganic and Organometallic Polymers and Materials, 32(11), 4340–4358. https://doi.org/10.1007/s10904-022-02450-6
Aydogdu, A., Sumnu, G., & Sahin, S. (2018). A novel electrospun hydroxypropyl methylcellulose/polyethylene oxide blend nanofibers: Morphology and physicochemical properties. Carbohydrate Polymers, 181, 234–246. https://doi.org/10.1016/j.carbpol.2017.10.071
Alzahrani, H. S., Almaghamsi, H., Al-Balawi, S. A., & et al. (2024). Study of structural, optical, photoluminescence, dielectric, and conductivity properties of PVDF/PVP-SnO2 nanocomposites for optoelectronics and micro-supercapacitors. Journal of Energy Storage, 102, Article 114034. https://doi.org/10.1016/j.est.2024.114034
Aziz, S. B., Abdulwahid, R. T., Aziz, D. M., & et al. (2024). Study of dielectric and interfacial properties of functional biopolymer-based electrolyte with enhanced conductivity for energy storage application. Materials Chemistry and Physics, 322, Article 129607. https://doi.org/10.1016/j.matchemphys.2024.129607
Chang, R., Liang, Y., Hao, Q., & et al. (2023). Hexamethylene diisocyanate-modified Al2O3 as inorganic fillers enabling low resistance and high stable cross-linked polymer electrolyte of lithium metal batteries. Chemical Physics Letters, 820, Article 140468. https://doi.org/10.1016/j.cplett.2023.140468
Cyriac, V., Ismayil, I., Sudhakar, Y. N., & et al. (2024). Effect of dopant on ion-dynamics of sodium ion-based flexible polyblend electrolyte for electrochemical device application. Materials Research Bulletin, 169, Article 112498. https://doi.org/10.1016/j.materresbull.2023.112498
Dhatarwal, P., & Sengwa, R. J. (2021). Poly(vinyl pyrrolidone) matrix and SiO2, Al2O3, SnO2, ZnO, and TiO2 nanofillers comprise biodegradable nanocomposites of controllable optical properties for optoelectronic applications. Optik, 241, Article 167215. https://doi.org/10.1016/j.ijleo.2021.167215
Elashmawi, I. S., & Al-Muntaser, A. A. (2021). Influence of Co3O4 nanoparticles on the optical, and electrical properties of CMC/PAM polymer: Combined FTIR/DFT study. Journal of Inorganic and Organometallic Polymers and Materials, 31(7), 2682–2690. https://doi.org/10.1007/s10904-021-01956-9
Fan, L., Lu, Y., Li, Q., & et al. (2018). Recent progress of the solid-state electrolytes for high-energy metal-based batteries. Advanced Energy Materials, 8(34), Article 1702657. https://doi.org/10.1002/aenm.201702657
Feng, J., Chen, Y., Zhang, H., & et al. (2021). PEO based polymer-ceramic hybrid solid electrolytes: A review. Nano Convergence, 8(1), Article 2. https://doi.org/10.1186/s40580-020-00252-5
Goh, Z. L., Saidi, N. M., Farhana, N. K., & et al. (2022). Sonochemically synthesized cobalt oxide nanoparticles as an additive for natural polymer iodide electrolyte based dye-sensitized solar cells. Sustainable Energy Technologies and Assessments, 49, Article 101746. https://doi.org/10.1016/j.seta.2021.101746
Gu, X., Wang, S., Liu, J., & et al. (2023). Effect of hydroxypropyl methyl cellulose (HPMC) as foam stabilizer on the workability and pore structure of iron tailings sand autoclaved aerated concrete. Construction and Building Materials, 376, Article 130979. https://doi.org/10.1016/j.conbuildmat.2023.130979
Han, C., Wang, S., Cui, Z., & et al. (2024). Recent progress in gel polymer electrolyte for lithium metal batteries. Giant, 20, Article 100337. https://doi.org/10.1016/j.giant.2024.100337
Heiba, Z. K., Abdel-Kader, M. H., Mohamed, M. B., & et al. (2023). Reinforcement of linear/nonlinear optical and dielectric characteristics of PVC/PEG blend based on CeO2/TBAI filler. Inorganic Chemistry Communications, 158, Article 111624. https://doi.org/10.1016/j.inoche.2023.111624
Hemalatha, R., Sundaresan, B., Moniha, V., & et al. (2019). Studies of proton conducting polymer electrolyte based on PVA, amino acid proline and NH4SCN. Journal of Science: Advanced Materials and Devices, 4(1), 101–110. https://doi.org/10.1016/j.jsamd.2019.01.004
Hoang, T., Mai, T. T., Thang, V. V., & et al. (2019). Novel drug delivery system based on ginsenoside Rb1 loaded to chitosan/alginate nanocomposite films. Journal of Nanoscience and Nanotechnology, 19(6), 3293–3300. https://doi.org/10.1166/jnn.2019.16116
Hu, J., Wang, W., Zhou, B., & et al. (2019). Poly(ethylene oxide)-based composite polymer electrolytes embedding with ionic bond modified nanoparticles for all-solid-state lithium-ion battery. Journal of Membrane Science, 575, 200–208. https://doi.org/10.1016/j.memsci.2019.01.025
Jayalakshmi, K., Hegde, S., Sanjeev, G., & et al. (2024a). Improving electrolyte performance: Nanocomposite solid polymer electrolyte films with cobalt oxide nanoparticles. Polymer Composites, 45(1), 137–150. https://doi.org/10.1002/pc.27763
Jayalakshmi, K., Ismayil, I., Hegde, S., & et al. (2024b). Investigating the properties of hydroxy propyl methyl cellulose based magnesium ion-conducting solid polymer electrolytes for primary battery applications. Journal of Energy Storage, 89, Article 111575. https://doi.org/10.1016/j.est.2024.111575
Jinisha, B., Jayalekshmi, S., Manoj, M., & et al. (2017). Poly (ethylene oxide) (PEO)-based, sodium ion-conducting, solid polymer electrolyte films, dispersed with Al2O3 filler, for applications in sodium ion cells. Ionics, 24(6), 1675–1683. https://doi.org/10.1007/s11581-017-2332-2
Joyal, N., Chang, Y.-C., Shonar, M., & et al. (2022). Solid polymer electrolytes with hydrates for structural supercapacitors. Journal of Energy Storage, 51, Article 104459. https://doi.org/10.1016/j.est.2022.104459
Jyoti, J., Kumar, A., Dhakate, S. R., & et al. (2018). Dielectric and impedance properties of three dimension graphene oxide-carbon nanotube acrylonitrile butadiene styrene hybrid composites. Polymer Testing, 68, 456–466. https://doi.org/10.1016/j.polymertesting.2018.04.003
Kanakaraj, M. T., Bhajantri, R. F., Chavan, C., & et al. (2023). Investigation on the structural and ion transport properties of magnesium salt doped HPMC-PVA based polymer blend for energy storage applications. Journal of Non-Crystalline Solids, 609, Article 122276. https://doi.org/10.1016/j.jnoncrysol.2023.122276
Khalil, R. (2017). Impedance and modulus spectroscopy of poly(vinyl alcohol)-Mg[ClO4]2 salt hybrid films. Applied Physics A, 123(7), Article 482. https://doi.org/10.1007/s00339-017-1026-y
Li, J., Zhong, L., Li, J.-X., & et al. (2023). Insights into the effects of different inorganic fillers on the electrochemical performances of polymer solid electrolytes. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 671, Article 131704. https://doi.org/10.1016/j.colsurfa.2023.131704
Liu, W., Wang, S., Sendek, A. D., & et al. (2017). Enhancing ionic conductivity in composite polymer electrolytes with well-aligned ceramic nanowires. Nature Energy, 2(5), Article 17035. https://doi.org/10.1038/nenergy.2017.35
Luo, R., Huang, Y., Wang, M., & et al. (2024). Facile synthesis of ultrafine Co3O4/Al2O3 catalysts for superior peroxymonosulfate activation in rhodamine B degradation. Materials Today Communications, 41, Article 110915. https://doi.org/10.1016/j.mtcomm.2024.110915
Mallakpour, S., & Khadem, E. (2015). Recent development in the synthesis of polymer nanocomposites based on nano-alumina. Progress in Polymer Science, 51, 74–93. https://doi.org/10.1016/j.progpolymsci.2015.07.004
Mallaiah, Y., Jeedi, V. R., Swarnalatha, R., & et al. (2021). Impact of polymer blending on ionic conduction mechanism and dielectric properties of sodium based PEO-PVdF solid polymer electrolyte systems. Journal of Physics and Chemistry of Solids, 155, Article 110096. https://doi.org/10.1016/j.jpcs.2021.110096
Mansur, H. S., Sadahira, C. M., Souza, A. N., & et al. (2008). FTIR spectroscopy characterization of poly (vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde. Materials Science and Engineering: C, 28(4), 539–548. https://doi.org/10.1016/j.msec.2007.10.088
Mei, J., Liao, T., Ayoko, G. A., & et al. (2019). Cobalt oxide-based nanoarchitectures for electrochemical energy applications. Progress in Materials Science, 103, 596–677. https://doi.org/10.1016/j.pmatsci.2019.03.001
Mohammed, A. A., Khodair, Z. T., & Khadom, A. A. (2020). Preparation and investigation of the structural properties of α-Al2O3 nanoparticles using the sol-gel method. Chemical Data Collections, 29, Article 100531. https://doi.org/10.1016/j.cdc.2020.100531
Nguyen, V. C., Dam, T., Na, H.-B., & et al. (2025). Plasticized composite electrolyte with Al2O3 nanofiller-reinforced PVDF-HFP for solid-state lithium–metal batteries. ACS Applied Energy Materials, 8(3), 3120–3131. https://doi.org/10.1021/acsaem.4c03301
Pan, J., Li, C., Peng, Y., & et al. (2023). Application of transition metal (Ni, Co and Zn) oxides based electrode materials for ion-batteries and supercapacitors. International Journal of Electrochemical Science, 18(4), Article 100233. https://doi.org/10.1016/j.ijoes.2023.100233
Pitawala, H. M. J. C., Dissanayake, M. A. K. L., & Seneviratne, V. A. (2007). Combined effect of Al2O3 nano-fillers and EC plasticizer on ionic conductivity enhancement in the solid polymer electrolyte (PEO)9LiTf. Solid State Ionics, 178(13-14), 885–888. https://doi.org/10.1016/j.ssi.2007.04.008
Polu, A. R., Kareem, A. A., & Rasheed, H. K. (2022). Thermal, electrical and electrochemical properties of ionic liquid-doped poly(ethylene oxide)–LiTDI polymer electrolytes for Li-ion batteries. Journal of Solid State Electrochemistry, 27(2), 409–416. https://doi.org/10.1007/s10008-022-05333-5
Polu, A. R., Singh, P. K., Kareem, A. A., & et al. (2025). Enhancing ionic conductivity, mechanical stability and electrochemical properties simultaneously by integrating POSS-PEG13.3 hybrid nanoparticles into PEO-NaClO4 solid polymer electrolytes. Chemical Physics Impact, 10, Article 100778. https://doi.org/10.1016/j.chphi.2024.100778
Qiao, X., Zhang, M., Liu, X., & et al. (2023). High viscosity hydroxypropyl methyl cellulose to improve inkjet printing for cotton/polyamide fabrics. Industrial Crops and Products, 191, Article 115907. https://doi.org/10.1016/j.indcrop.2022.115907
Ragab, H. M. (2024). Tailoring the optical properties and electrical conductivity of polyvinyl alcohol/polyvinyl pyrrolidone filled with cobalt oxide nanoparticles for nanodielectric applications. Optical Materials, 147, Article 114785. https://doi.org/10.1016/j.optmat.2023.114785
Ragab, H. M., Diab, N. S., Dawoud, J. N., & et al. (2024). Novel HPMC/PEDOT:PSS nanocomposite for optoelectronic and energy storage applications. RSC Advances, 14(51), 37330–37340. https://doi.org/10.1039/D4RA03579H
Rehman, Wu., Khattak, M. T. N., Saeed, A., & et al. (2023). Co3O4/NiO nanocomposite as a thermocatalytic and photocatalytic material for the degradation of malachite green dye. Journal of Materials Science: Materials in Electronics, 34(36), Article 2242. https://doi.org/10.1007/s10854-022-09428-7
Saeed, A., & Abdulwahed, J. A. M. (2024a). Development and characterization of PVA-based nanocomposites with graphene and natural quartz nanoparticles for energy storage applications. Journal of Energy Storage, 98, Article 113138. https://doi.org/10.1016/j.est.2024.113138
Saeed, A., Alwafi, R., Alenizi, M. A., & et al. (2025). Influence of zinc acetate on HPMC/CMC polymer blend: Investigation of their composites’ structural, optical, and dielectric properties for dielectric capacitor applications. Inorganic Chemistry Communications, 171, Article 113536. https://doi.org/10.1016/j.inoche.2024.113536
Saeed, A., Asnag, G. M., Asnag, A. M., & et al. (2024b). Structural, optical, and electrical characteristics of HPMC/PVA-I2O5 composites: Fabrication and performance analysis for energy storage applications. Journal of Energy Storage, 96, Article 112765. https://doi.org/10.1016/j.est.2024.112765
Saeed, A., Morsi, M. A., Assran, A. S., & et al. (2024c). Enhancing optical, structural, thermal, electrical properties, and antibacterial activity in chitosan/polyvinyl alcohol blend with ZnO nanorods: Polymer nanocomposites for optoelectronics and food/medical packaging applications. Polymer Bulletin, 81(14), 11645–11670. https://doi.org/10.1007/s00289-024-05270-5
Shukur, M. F., Ithnin, R., Illias, H. A., & et al. (2013). Proton conducting polymer electrolyte based on plasticized chitosan–PEO blend and application in electrochemical devices. Optical Materials, 35(10), 1834–1841. https://doi.org/10.1016/j.optmat.2013.03.004
Soliman, T. S., Abomostafa, H. M., & Abouhaswa, A. S. (2024). Synthesis of Ni0.8Mg0.2Fe2O4 nanoparticles and its impact in enhancing the structural, magnetic, and optical properties of the PVA-CMC polymer blend. Inorganic Chemistry Communications, 164, Article 112408. https://doi.org/10.1016/j.inoche.2024.112408
Sunitha, V. R., & Radhakrishnan, S. (2016). Impedance and dielectric studies of nanocomposite polymer electrolyte systems using MMT and ferroelectric fillers. Ionics, 22(12), 2437–2446. https://doi.org/10.1007/s11581-016-1784-0
Tok, A. I. Y., Boey, F. Y. C., & Zhao, X. L. (2006). Novel synthesis of Al2O3 nano-particles by flame spray pyrolysis. Journal of Materials Processing Technology, 178(1-3), 270–273. https://doi.org/10.1016/j.jmatprotec.2006.04.007
Vijaya, B., Anand, S., Jayasurya, D., & et al. (2025). Enhancing the ion transportation on PVDF-HFP and PMMA based solid polymer electrolyte by fusing Co3O4 and NiO NPs for energy storage applications. Polymer Engineering & Science, 65(3), 680–699. https://doi.org/10.1002/pen.27034
Xue, Z., He, D., & Xie, X. (2015). Poly(ethylene oxide)-based electrolytes for lithium-ion batteries. Journal of Materials Chemistry A, 3(38), 19218–19253. https://doi.org/10.1039/c5ta03471j
Yao, P., Lu, J., Lavorgna, M., & et al. (2019). Review on polymer-based composite electrolytes for lithium batteries. Frontiers in Chemistry, 7, Article 522. https://doi.org/10.3389/fchem.2019.00522
Yin, Y., He, J., Shi, Z., & et al. (2021). Flexible cellulose/alumina (Al2O3) nanocomposite films with enhanced energy density and efficiency for dielectric capacitors. Cellulose, 28(3), 1541–1553. https://doi.org/10.1007/s10570-020-03600-0
Yu, X., & Manthiram, A. (2021). A review of composite polymer-ceramic electrolytes for lithium batteries. Energy Storage Materials, 34, 282–300. https://doi.org/10.1016/j.ensm.2020.10.006
Zhu, J., Liu, X., Che, Y., & et al. (2020). Effect of Na2CO3 on the microstructure and macroscopic properties and mechanism analysis of PVA/CMC composite film. Polymers, 12(2), Article 453. https://doi.org/10.3390/polym12020453
Homann, G., Stolz, L., Nair, J., & et al. (2020). Poly(ethylene oxide)-based electrolyte for solid-state-lithium-batteries with high voltage positive electrodes: Evaluating the role of electrolyte oxidation in rapid cell failure. Scientific Reports, 10(1), Article 6137. https://doi.org/10.1038/s41598-020-61373-9
