Tunable structural, optical, and electrical performance of PEMA/PMMA–CoCl₂ composites for advanced optoelectronics and energy storage applications
DOI:
https://doi.org/10.1038/s41598-025-26091-0Keywords:
PEMA/PMMA/CoCl2 composite films, Optical properties, Impedance analysis, Optoelectronic, Energy storage applicationsAbstract
This work investigates the effects of CoCl₂ doping on the structural, optical, and impedance characteristics of PEMA/PMMA blends for the advancement of sophisticated polymeric multifunctional materials. Composite films containing CoCl₂ were prepared using the solution-casting method and characterized by various analytical techniques. XRD and FTIR analysis revealed reduced crystallinity with significant interactions in the doped samples, SEM revealed a homogeneous morphology with slight porosity as a result of filler incorporation. UV–Vis spectra have demonstrated a systematic decrease of both direct and indirect band gaps, which evidences an effective tuning of the electronic structure via controlled doping. Electrical studies have demonstrated a significant increase of ionic conductivity at higher CoCl₂ content, which was further supported by impedance spectra that have revealed a lower bulk resistance and better charge transport. Conducing equivalent-circuit models further confirmed and quantified these improvements in conductivity. This is a dual-polymeric (PEMA/PMMA) matrix doped with CoCl₂, hence attaining the simultaneous control of structural order, optical properties, and ionic transport each rarely observable in convention polymer films. The optimized 5.0 wt.% composite exhibits an excellent balance between the conductivity and structural stability and, hence, is considered a promising candidate for tunable optoelectronic and energy storage applications.
References
A
Abdallah, E. M., Asnag, G. M., Morsi, M. A., Aljohani, M., Albalwa, N. N., & Yassin, A. Y. (2025). α-MoO3 nanobelts boosted the structural, optical, thermal, and dielectric properties of PEO/PVP blends for emerging optoelectronic/energy-storage applications. ACS Omega, 10(36), 36396–36411. https://doi.org/10.1021/acsomega.4c08123
Abdelghany, A. M., Oraby, A. H., & Asnag, G. M. (2019). Structural, thermal and electrical studies of polyethylene oxide/starch blend containing green synthesized gold nanoparticles. Journal of Molecular Structure, 1180, 15–25. https://doi.org/10.1016/j.molstruc.2018.11.069
Abdelhameed, D., Morsi, M. A., & Elsisi, M. E. (2025). Impact of CoCl2 on the structural, morphological, optical, and magnetic properties of PCL/PVC blend for advanced spintronic/optoelectronic applications. Ceramics International, 51(13), 18713–18722. https://doi.org/10.1016/j.ceramint.2024.11.204
Abdelrazek, E. M. (2007). Influence of FeCl3 filler on the structure and physical properties of polyethyl-methacrylate films. Physica B: Condensed Matter, 400(1-2), 26–32. https://doi.org/10.1016/j.physb.2007.06.012
Abdelrazek, E. M., & Elashmawi, I. S. (2008). Characterization and physical properties of CoCl2 filled polyethyl-methacrylate films. Polymer Composites, 29(9), 1036–1043. https://doi.org/10.1002/pc.20491
Abdelrazek, E. M., Oraby, A. H., Asnag, G. M., Abdelghany, A. M., Alshehari, A. M., & Gumaan, M. S. (2020). Structural, optical, thermal, morphological and electrical studies of PEMA/PMMA blend filled with CoCl2 and LiBr as mixed filler. Journal of Electronic Materials, 49(10), 6107–6122. https://doi.org/10.1007/s11664-020-08323-4
Abdelrazek, E. M., & Ragab, H. M. (2015). Spectroscopic and dielectric study of iodine chloride doped PVA/PVP blend. Indian Journal of Physics, 89(6), 577–585. https://doi.org/10.1007/s12648-014-0618-5
Ahmeda, R. M., Ibrahiem, A. A., & El-Said, E. A. (2020). Effect of cobalt chloride as filler and PVP on the optical properties of PVA/PEG/PVP blends. Optics and Spectroscopy, 128(5), 642–655. https://doi.org/10.1134/S0030400X2005002X
Alenizi, M. A., Alshammari, A. H., Asnag, G. M., Morsi, M. A., Al-Muntaser, A. A., & Rajeh, A. (2024). Structural, optical, electrical, and dielectric properties of HPMC/PVP blend reinforced with I2O5 for optoelectronics and energy storage applications. Journal of Polymer Research, 31(10), Article 332. https://doi.org/10.1007/s10965-024-04182-2
Al-Hakimi, A. N., Asnag, G. M., Alminderej, F., Alhagri, I. A., Al-Hazmy, S. M., & Qahtan, T. F. (2023). Enhancing the structural, optical, thermal, and electrical properties of PVA filled with mixed nanoparticles (TiO2/Cu). Crystals, 13(1), Article 135. https://doi.org/10.3390/cryst13010135
Alghunaim, N. S. (2015). Spectroscopic analysis of PMMA/PVC blends containing CoCl2. Results in Physics, 5, 331–336. https://doi.org/10.1016/j.rinp.2015.11.004
Al-Muntaser, A. A., Alzahrani, E., Abo-Dief, H. M., Saeed, A., Alshammari, E. M., Al-Harthi, A. M., & Tarabiah, A. E. (2023). Tuning the structural, optical, electrical, and dielectric properties of PVA/PVP/CMC ternary polymer blend using ZnO nanoparticles for nanodielectric and optoelectronic devices. Optical Materials, 140, Article 113901. https://doi.org/10.1016/j.optmat.2023.113901
Anyaogu, I. D., Nwanya, A. C., Ezema, F. I., & Ejikeme, P. M. (2025). Cobalt ion-doped polyvinyl alcohol: A promising multivalent polymer electrolyte system for aluminium—Air battery application. Hybrid Advances, 8, Article 100369. https://doi.org/10.1016/j.hybadv.2024.100369
Askary, A. E., Awwad, N. S., Ibrahium, H. A., El-Morsy, M. A., Eed, E. M., Asnag, G. M., & Menazea, A. A. (2022). Synthesis of nanostructured Bi2O3NPs using laser ablation technique and its effect on the optical, thermal, and conductivity characterization of the PEO/CMC blend. Journal of Polymer Research, 29(5), Article 193. https://doi.org/10.1007/s10965-022-02998-w
Attaran, S. A., Hassan, A., & Wahit, M. U. (2015). Materials for food packaging applications based on bio-based polymer nanocomposites. Journal of Thermoplastic Composite Materials, 30(1), 143–173. https://doi.org/10.1177/0892705715588825
Atta, M. R., Alsulami, Q. M., Asnag, G. M., & Rajeh, A. (2021). Enhanced optical, morphological, dielectric, and conductivity properties of gold nanoparticles doped with PVA/CMC blend as an application in organoelectronic devices. Journal of Materials Science: Materials in Electronics, 32(8), 10443–10457. https://doi.org/10.1007/s10854-021-05701-7
B
Baraker, B. M., & Lobo, B. (2020). AC and DC electrical studies on cobalt chloride doped PVA–PVP blend films. AIP Conference Proceedings, 2244(1), Article 080015. https://doi.org/10.1039/7.080015
Begum, S., Fawzia, S., & Hashmi, M. S. J. (2020). Polymer matrix composite with natural and synthetic fibres. Advanced Materials and Processing Technologies, 6(3), 547–564. https://doi.org/10.1080/2374068X.2020.1728613
C
Chang, C., Chen, S., Yeadon, W., Peet, O., Formanek, P., Reineke, S., & Formanek, P. (2018). A narrow-bandgap donor polymer for highly efficient as-cast non-fullerene polymer solar cells with a high open circuit voltage. Organic Electronics, 58, 82–87. https://doi.org/10.1016/j.orgel.2018.03.042
Chapi, S. (2021). Influence of Co2+ on the structure, conductivity, and electrochemical stability of poly(ethylene oxide)-based solid polymer electrolytes: Energy storage devices. Journal of Electronic Materials, 50(3), 1558–1571. https://doi.org/10.1007/s11664-020-08670-2
Chapi, S., & Devendrappa, H. (2014). Influence of cobalt (II) chloride catalysed on the thermal and optical characterization of PEO based solid polymer electrolytes. Journal of Research Updates in Polymer Science, 3(4), 205–214. https://doi.org/10.6000/1929-5995.2014.03.04.2
Chaudhary, V., & Ahmad, F. (2020). A review on plant fiber reinforced thermoset polymers for structural and frictional composites. Polymer Testing, 91, Article 106792. https://doi.org/10.1016/j.polymertesting.2020.106792
Cherusseri, J., Sharma, K., & Kar, K. K. (2016). Polymer-based composite materials: Characterizations. In Characterization of Polymers and Composite Materials (pp. 37–77). Springer, Berlin Heidelberg. https://doi.org/10.1007/978-3-662-49279-6_2
Chohan, J. S., Boparai, K. S., Singh, R., & Hashmi, M. S. J. (2022). Manufacturing techniques and applications of polymer matrix composites: A brief review. Advanced Materials and Processing Technologies, 8(1), 884–894. https://doi.org/10.1080/2374068X.2020.1834241
Costa, C. M., Lee, Y. H., Kim, J. H., Lee, S. Y., & Lanceros-Méndez, S. (2019). Recent advances on separator membranes for lithium-ion battery applications: From porous membranes to solid electrolytes. Energy Storage Materials, 22, 346–375. https://doi.org/10.1016/j.ensm.2019.07.024
E
El Gohary, H. G., Alhagri, I. A., Qahtan, T. F., Al-Hakimi, A. N., Saeed, A., & Al-Muntaser, A. A. (2023). Modification and development of optical, thermal, dielectric properties and antibacterial activity of PVA/SA blend by Ag/Se nanofillers: Nanocomposites for energy storage devices and food packaging applications. Polymer Testing, 129Trace, Article 108258. https://doi.org/10.1016/j.polymertesting.2023.108258
El Gohary, H. G., Qahtan, T. F., Alharbi, H. G., Asnag, G. M., & Waly, A. L. (2023). Studies of the structural, optical, thermal, electrical and dielectric properties of a polyvinyl alcohol/sodium alginate blend doped with Cu nanoparticles and ZnO nanorods as hybrid nanofillers for use in energy storage devices. Journal of Polymers and the Environment, 31(7), 2930–2940. https://doi.org/10.1007/s10924-023-02781-y
H
Hema, S., Chandran, G. U., Sajith, M., Sulthan, K. R., & Sambhudevan, S. (2023). Polymer blend nanocomposites with CNTs for energy storage applications. In Polymer Blend Nanocomposites for Energy Storage Applications (pp. 241–270). Elsevier. https://doi.org/10.1016/B978-0-323-99628-0.00008-5
I
Ibrahim, P. A., Al-Harthi, A. M., Elshahawy, A. M., Saeed, A., Morsi, M. A., & Al-Muntaser, A. A. (2025). Glycerol as a multifunctional modifier: Synergistic enhancement of electrical and structural properties in PEO:NaF electrolytes. Journal of Electronic Materials, 54(9), 5478–5492. https://doi.org/10.1007/s11664-024-11484-y
K
Kaushik, A., Bajpai, P., Kumar, R., & Singh, P. (2013). Influence of Co doping on the structural, optical and magnetic properties of ZnO nanocrystals. Journal of Alloys and Compounds, 578, 328–335. https://doi.org/10.1016/j.jallcom.2013.05.021
Khalil, R. (2017). Impedance and modulus spectroscopy of poly(vinyl alcohol)-Mg[ClO4]2 salt hybrid films. Applied Physics A, 123(6), Article 422. https://doi.org/10.1007/s00339-017-1014-9
Kumar, V. V., Sadasivuni, K. K., Ponnamma, D., AlMaadeed, M. A., & Thomas, S. (2019). A review of recent advances in nanoengineered polymer composites. Polymers, 11(4), Article 644. https://doi.org/10.3390/polym11040644
M
Mahesh, V., Joladarashi, S., & Kulkarni, S. M. (2021). A comprehensive review on material selection for polymer matrix composites subjected to impact load. Defence Technology, 17(1), 257–277. https://doi.org/10.1016/j.dt.2020.03.010
Malik, P., Chauhan, G., Kumar, P., & Deep, A. (2022). Effect of polymer concentration on the electro-optical, dielectric and photoluminescence properties of confined ferroelectric liquid crystals composites. Liquid Crystals, 49(14), 2008–2018. https://doi.org/10.1080/02678292.2022.2078414
Mani, S., Patwardhan, S., Hadkar, S., Mishra, K., & Sarawade, P. (2022). Effect of polymer concentration on optical and electrical properties of liquid crystals for photonic applications. Materials Today: Proceedings, 62, 7035–7039. https://doi.org/10.1016/j.matpr.2022.03.214
Mekky, A. B. H. (2018). Investigation of the influence of Br- and As-doped silica single-wall nanotubes: Hartree-Fock method. Bulletin of Materials Science, 41(6), Article 164. https://doi.org/10.1007/s12034-018-1681-y
Millan, W. M., Toledanothompson, T. T., Arriaga, L. G., & Smit, M. A. (2008). Characterization of composite materials of electroconductive polymer and cobalt as electrocatalysts for the oxygen reduction reaction. International Journal of Hydrogen Energy, 34(2), 694–702. https://doi.org/10.1016/j.ijhydene.2008.11.021
Mishra, R. K., Chianella, I., Sarkar, J., Nezhad, H. Y., & Goel, S. (2024). Nanostructured ZnO-CQD hybrid heterostructure nanocomposites: Synergistic engineering for sustainable design, functional properties, and high-performance applications. ChemNanoMat, 10(8), Article e202400020. https://doi.org/10.1002/cnma.202400020
Morsi, M. A., Pashameah, R. A., Alsubhi, S. A., Alzahrani, E., & Al-Muntaser, A. A. (2024). Reinforced PEO/Cs polymers blend with Al2O3/TiO2 hybrid nanofillers: Nanocomposites for optoelectronics and energy storage. Journal of Energy Storage, 88Trace, Article 111554. https://doi.org/10.1016/j.est.2024.111554
Morsi, M., Rajeh, A. A., & Al-Muntaser, A. A. (2019). Reinforcement of the optical, thermal and electrical properties of PEO based on MWCNTs/Au hybrid fillers: Nanodielectric materials for organoelectronic devices. Composites Part B: Engineering, 173, Article 106957. https://doi.org/10.1016/j.compositesb.2019.106957
O
Oladele, I. O., Akinwekomi, A. D., Ibrahim, I. O., Adegun, M. H., & Talabi, S. I. (2021). Assessment of impact energy, wear behavior, thermal resistance and water absorption properties of hybrid bagasse fiber/CaCO3 reinforced polypropylene composites. International Polymer Processing, 36(2), 205–212. https://doi.org/10.1515/ipp-2020-360205
Oladele, I. O., Omotosho, T. F., & Adediran, A. A. (2020). Polymer-based composites: An indispensable material for present and future applications. International Journal of Polymer Science, 2020, Article 8834518. https://doi.org/10.1155/2020/8834518
Oladele, I. O., Omotosho, T. F., Ogunwande, G. S., & Owa, F. A. (2021). A review on the philosophies for the advancement of polymer-based composites: Past, present and future perspective. Applied Science and Engineering Progress, 14(4), 553–579. https://doi.org/10.14416/j.asep.2021.05.002
R
Rajendran, S., Prabhu, M. R., & Rani, M. U. (2008). Characterization of PVC/PEMA based polymer blend electrolytes. International Journal of Electrochemical Science, 3(2), 282–290.
Rajeh, A., Ragab, H. M., & Abutalib, M. M. (2020). Co doped ZnO reinforced PEMA/PMMA composite: Structural, thermal, dielectric and electrical properties for electrochemical applications. Journal of Molecular Structure, 1217, Article 128447. https://doi.org/10.1016/j.molstruc.2020.128447
Ramesh, S., Uma, O., Shanti, R., Yi, L. J., & Ramesh, K. (2013). Preparation and characterization of poly (ethyl methacrylate) based polymer electrolytes doped with 1-butyl-3-methylimidazolium trifluoromethanesulfonate. Measurement, 48, 263–273. https://doi.org/10.1016/j.measurement.2013.11.021
Rameshkumar, C., Sarojini, S., Naresh, K., & Subalakshmi, R. (2017). Preparation and characterization of pristine PMMA and PVDF thin film using solution casting process for optoelectronic devices. Journal of Surface Science and Technology, 33(1-2), 12–18. https://doi.org/10.18311/jsst/2017/15632
Rawal, S. (2024). Poly (Ethyl Methacrylate) (PEMA) and its composites for various applications: Background, recent progress and future challenges. Macromolecular Symposia, 413(1), Article 2300096. https://doi.org/10.1002/masy.202300096
Reddy, M. R., Sreedhar, B., Rao, K. V., & Sharma, A. K. (2016). X-RD, SEM, FT-IR, DSC studies of polymer blend films of PMMA and PEO. Materials Today: Proceedings, 3(10), 3713–3718. https://doi.org/10.1016/j.matpr.2016.11.018
Reinoso, D. M., & Frechero, M. A. (2022). Strategies for rational design of polymer-based solid electrolytes for advanced lithium energy storage applications. Energy Storage Materials, 52, 430–464. https://doi.org/10.1016/j.ensm.2022.08.012
S
Saeed, A., Al-Ghamdi, S. A., Asnag, G. M., Morsi, M. A., Alwafi, R., & Al-Muntaser, A. A. (2025). Enhanced the structural, optical, electrical, and dielectric properties of PEO/CMC blend via TiO2 and ZnO nanoceramics: Nanocomposites for capacitor applications. Journal of Sol-Gel Science and Technology, 115(3), 732–751. https://doi.org/10.1007/s10971-024-06198-x
Saeed, A., Al-Harthi, A. M., Morsi, M. A., Qahtan, T. F., Hanash, F. E., Guizani, I., Assran, A. S., Asnag, G. M., & Alwafi, R. (2024). Enhancing optical, structural, thermal, electrical properties, and antibacterial activity in chitosan/polyvinyl alcohol blend with ZnO nanorods: Polymer nanocomposites for optoelectronics and food/medical packaging applications. Polymer Bulletin, 81(12), 11645–11670. https://doi.org/10.1007/s00289-023-05076-x
Saeed, A., Asnag, G. M., Alghamdi, A. M., Alghamdi, S. A., Alwafi, R., Alanazi, F. K., & Morsi, M. A. (2024). Structural, optical, and electrical characteristics of HPMC/PVA-I2O5 composites: Fabrication and performance analysis for energy storage applications. Journal of Energy Storage, 96Trace, Article 112765. https://doi.org/10.1016/j.est.2024.112765
Saeed, A., Alwafi, R., Abdulwahed, J. A. M., Algethami, M., Asnag, G. M., Al-Marhaby, F. A., Assran, A. S., Madkhli, A. Y., Banoqitah, E., Albaidani, K., & Alajmi, F. (2024). A comprehensive study on structural, optical, electrical, and dielectric properties of PVA-PVP/Ag-TiO2 nanocomposites for dielectric capacitor applications. Journal of Alloys and Compounds, 977, Article 173412. https://doi.org/10.1016/j.jallcom.2024.173412
Saeed, A., Al-Muntaser, A. A., Abdelghany, A. M., Elshahawy, A. M., Al-Hakimi, A. N., & Alhagri, I. A. (2025). Influence of zinc acetate on HPMC/CMC polymer blend: Investigation of their composites' structural, optical, and dielectric properties for dielectric capacitor applications. Inorganic Chemistry Communications, 171, Article 113536. https://doi.org/10.1016/j.inoche.2024.113536
Saron, K. M. A., Algethami, N., Ahmed, M. K., Ragab, H. S., Saeed, A., & Rajeh, A. (2024). Controlling the dielectric and optical properties of polyvinyl alcohol/polyethylene glycol blends by adding copper oxide nanoparticles for application in energy storage devices. Journal of Sol-Gel Science and Technology, 109(3), 757–772. https://doi.org/10.1007/s10971-023-06282-3
Sengwa, R. J., & Corporate, S. (2017). Dielectric and electrical properties of PEO–Al2O3 nanocomposites. Journal of Alloys and Compounds, 701, 652–659. https://doi.org/10.1016/j.jallcom.2017.01.124
Siengchin, S. (2023). A review on lightweight materials for defence applications: Present and future developments. Defence Technology, 24, 1–17. https://doi.org/10.1016/j.dt.2023.03.002
Sunitha, V. R., & Radhakrishnan, S. (2016). Impedance and dielectric studies of nanocomposite polymer electrolyte systems using MMT and ferroelectric fillers. Ionics, 22(12), 2437–2446. https://doi.org/10.1007/s11581-016-1772-z
T
Tarabiah, A. E., Alhadlaq, H. A., Alaizeri, Z. M., Ahmed, A. A., Asnag, G. M., & Ahamed, M. (2022). Enhanced structural, optical, electrical properties and antibacterial activity of PEO/CMC doped ZnO nanorods for energy storage and food packaging applications. Journal of Polymer Research, 29(5), Article 167. https://doi.org/10.1007/s10965-022-02996-y
Tawansi, A., Oraby, A. H., Abdelrazek, E. M., Ayad, M. I., & Abdelaziz, M. (1998). Effect of local structure of MnCl2-filled PVDF films on their optical, electrical, electron spin resonance, and magnetic properties. Journal of Applied Polymer Science, 70(8), 1437–1445. https://doi.org/10.1002/(SICI)1097-4628(19981121)70:8<1437::AID-APP4>3.0.CO;2-9
W
Wadatkar, N. S., & Waghuley, S. A. (2016). Studies on properties of as-synthesized conducting polythiophene through aqueous chemical route. Journal of Materials Science: Materials in Electronics, 27(10), 10573–10581. https://doi.org/10.1007/s10854-016-5151-5
Wadatkar, N. S., & Waghuley, S. A. (2018). A novel studies on electrical behaviour of chemically synthesized conducting polyindole. Indian Journal of Physics, 92(12), 1551–1559. https://doi.org/10.1007/s12648-018-1234-x
Wani, A. A., Kumar, A., Shah, R. A., & Sahi, S. V. (2024). Critical review on composite-based polymer electrolyte membranes toward fuel cell applications: Progress and perspectives. Energy & Fuels, 38(20), 18169–18193. https://doi.org/10.1021/acs.energyfuels.4c03124
